Sun Guard Canopy Sunshades #1 value made in the USA

Add lights to your canopy

Lighting Installation Instructions for Sun Guard Canopy

Shown in the photo is a Blazer Model C-123 Trapezoid 12Volt Utility Light which was purchased at TSC Tractor Supply. It comes with a mounting yoke that can be bolted to the Sun Guard strut end.  Drill a 5/16” hole 3/8” from the end in the tubing bottom face.   The light comes with a mounting bolt that is to long for the application and can be used if you insert (4) 5/16 flat washers in between the yoke & strut.  We do not supply any lights or materials, this is for informational purposes only.  You should wrap the wires with black or electrical tape to protect from chafing against bolts & nuts inside the tubing..  

SITE MAP