Sun Guard Canopy Sunshades #1 value made in the USA
__________________________
Will it fit -
The standard Universal model ( good for 90% of all ROPS ) fits up to 42” wide
Overall ROPS width & up to 2 1/4” x 4” ROPS up right leg. This is at the bracket clamping location aprox 14” below the shell installed height.
For the other 10% we need a long discourse. Take heart we can fit 9% with special brackets and struts at no additional cost. You will have to provide us with measurements we will need. Alast for that last bothersome last 1% who bought the totally weird machine, you will have to suffer in the sun.
The next subject is ROPS slope angle. The standard Universal model is good for forward lean (slope) 1 1/4” per foot & 3” per foot backward slope. How you measure this is .,..
For the other 10% we need a long discourse. Take heart we can fit 9% with special brackets (for up to 4"x 8" leg) and/or struts at no additional cost. You will have to furnish us with the measurements we will need. Alast for that last 1% who bought the totally weird machine, you will just have to suffer in the sun.
The next subject is ROPS slope angle. The Standard Universal model is good for forward slope 1 1/4” per foot & 3” per foot of backward slope. How you measure this is...take a 12” ruler or level and with the corner against the ROPS face, hanging straight down ... Measure the gap back to the ROPS.. Very few ROPS slope more than this. If yours does than we will furnish struts to accommodate. Such as \FS\ . Symbol for Forward sloping struts.
Who needs [WB] for wider than 42” ROPS? Either some of the larger trackers, some Kubota Zero turn mowers and sometimes tractors with the back hoe option. There can be others..
Who needs [BRL] for bigger than 2 x 4” ROPS leg? Some of the larger Massey’s & New Hollands come to mind.